MontaVista(R) Linux(R) Professional Edition 4.0.1 (0600996)
Linux/ppc 2.6.10.70.33_mvlcge401-cdl_vrl-ppc_82xx
mps login: root
Linux mps 2.6.10.70.33_mvlcge401-cdl_vrl-ppc_82xx #1 Mon Jan 28 13:58:40 CET 200
8 ppc GNU/Linux
Welcome to MontaVista(R) Linux(R) Professional Edition 4.0.1 (0600996).
root@mps:~# /sbin/shutdown now -r
Stopping Tiger service (SCA):SCA: No ACTIVE package found to stop!
Stopping watchdog daemon: WDT closed, but not stopped automaticly
watchdog.
No package installed, please install one manualy!
Stopping periodic command scheduler: cron.
Stopping web server: apache.
Stopping internet superserver: inetd.
Stopping network management services: snmpd snmptrapd.
Stopping OpenBSD Secure Shell server: sshd.
Saving the System Clock time to the Hardware Clock...Hardware Clock updated: Fri
Mar 20 11:42:14 CET 2009
: done.
Stopping SNMP Agent Extension: niesubag.
Stopping FTP server: wu-ftpd.
Stopping NFS common utilities: lockd statd.
Stopping portmap daemon: portmap.
Stopping deferred execution scheduler: atd.
Stopping system log daemon: klogd syslogd.
Stopping Tiger service (CSA):Stopping Tiger service (SCA):msgget: No such file o
r directory
Unable to initialize application!
Sending all processes the TERM signal... done.
vrl_lvd: kVrl_lvd exiting
Sending all processes the KILL signal... done.
Unmounting remote filesystems... done.
Deactivating swap...done.
Unmounting local filesystems...done.
Starting reboot command: reboot
Rebooting...
Restarting systa
U-Boot 1.1.4 (Iskratel MYLC0A04, May 2008)
MPC8272 Reset Status: External Soft, External Hard
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300
- dfbrg 0, corecnf 0x1a, busdf 5, cpmdf 1, plldf 0, pllmf 5
- vco_out 396000000, scc_clk 99000000, brg_clk 99000000
- cpu_clk 264000000, cpm_clk 198000000, bus_clk 66000000
- pci_clk 49500000
CPU: MPC8272 (HiP7 Rev 14, Mask 1.0 1K50M) at 264 MHz
Board: Iskratel CDL ver. 0 (MPC8247)
Host: board: VRL, vendor: Iskratel
LCD: Batron (BTHQ128064AVD-FSTF)
I2C: ready
Watchdog enabled
DRAM: 64 MB
FLASH: 8 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: FCC2 ETHERNET
POST i2c PASSED
IDE: Bus 0: OK
Device 0: Model: SMART CF Firm: 20060729 Ser#: 00001011710100321124
Type: Removable Hard Disk
Capacity: 245.0 MB = 0.2 GB (501760 x 512)
Hit any key to stop autoboot: 0
=>
=> ls
Scanning JFFS2 FS: . done.
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=> ls
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
lrwxrwxrwx 71 Wed Jun 04 07:19:51 2008 uImage -> uImage-iskratel-cdl_vrl-
ppc_82xx-2.6.10.88.05_mvlcge401-080602_MYNJ0A05
-rw-r--r-- 1100714 Mon Jun 02 08:20:29 2008 uImage-iskratel-cdl_vrl-ppc_82xx-2
.6.10.88.05_mvlcge401-080602_MYNJ0A05
=>
U-Boot 1.1.4 (Iskratel MYLC0A04, May 2008)
MPC8272 Reset Status: External Soft, External Hard
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300
- dfbrg 0, corecnf 0x1a, busdf 5, cpmdf 1, plldf 0, pllmf 5
- vco_out 396000000, scc_clk 99000000, brg_clk 99000000
- cpu_clk 264000000, cpm_clk 198000000, bus_clk 66000000
- pci_clk 49500000
CPU: MPC8272 (HiP7 Rev 14, Mask 1.0 1K50M) at 264 MHz
Board: Iskratel CDL ver. 0 (MPC8247)
Host: board: VRL, vendor: Iskratel
LCD: Batron (BTHQ128064AVD-FSTF)
I2C: ready
Watchdog enabled
DRAM: 64 MB
POST memory PASSED
FLASH: 8 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: FCC2 ETHERNET
POST i2c PASSED
IDE: Bus 0: OK
Device 0: Model: SMART CF Firm: 20060729 Ser#: 00001011710100321124
Type: Removable Hard Disk
Capacity: 245.0 MB = 0.2 GB (501760 x 512)
Hit any key to stop autoboot: 0
=> saveenv
Saving Environment to Flash...
.
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
.
Protected 1 sectors
=>
#help
? - alias for 'help'
askenv - get environment variables from stdin
autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
brginfo - print Baud Rate Generator (BRG) registers
carinfo - print Clocks and Reset registers
cdp - Perform CDP network configuration
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
date - get/set/reset date & time
dcache - enable or disable data cache
dhcp - invoke DHCP client to obtain IP/boot params
diag - perform board diagnostics
diskboot- boot from IDE device
dmainfo - print SDMA/IDMA registers
echo - echo args to console
erase - erase FLASH memory
exit - exit script
fccinfo - print FCC registers
flinfo - print FLASH memory information
fsinfo - print information about filesystems
fsload - load binary file from a filesystem image
go - start application at address 'addr'
help - print online help
i2cinfo - print I2C registers
icache - enable or disable instruction cache
icinfo - print Interrupt Controller registers
icrc32 - checksum calculation
ide - IDE sub-system
iloop - infinite loop on address range
imd - i2c memory display
iminfo - print header information for application image
imls - list all images found in flash
imm - i2c memory modify (auto-incrementing)
imw - memory write (fill)
in - read data from an IO port
inm - memory modify (constant address)
iopinfo - print I/O Port registers
iopset - set I/O Port registers
iprobe - probe to discover valid I2C chip addresses
irqinfo - print information about IRQs
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loop - infinite loop on address range
ls - list files in a directory (default /)
mccinfo - print MCC registers
md - memory display
memcinfo- print Memory Controller registers
mii - MII utility commands
mm - memory modify (auto-incrementing)
mtest - simple RAM test
muxinfo - print CPM Multiplexing registers
mw - memory write (fill)
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
out - write datum to IO port
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
saves - save S-Record file over serial line
sccinfo - print SCC registers
setenv - set environment variables
siinfo - print Serial Interface (SI) registers
sitinfo - print System Integration Timers (SIT) registers
siuinfo - print System Interface Unit (SIU) registers
sleep - delay execution for some time
smcinfo - print SMC registers
spiinfo - print Serial Peripheral Interface (SPI) registers
test - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
version - print monitor version
wdt - Watchdog utility commands
Здравствуйте, Иван. Не могли бы Вы помочь мне с MPS Iskratel?
ВідповістиВидалитиconfosquido1988 Andrew Suave https://www.hhasur.net/profile/maegynwyndeedeandryah/profile
ВідповістиВидалитиdripchangfacno